State of charge estimation for lithium-ion battery based on an intelligent adaptive unscented Kalman filter

Adaptive unscented Kalman filter (AUKF) has been widely used for state of charge (SOC) estimation of lithium-ion battery. The noise covariance of the conventional AUKF method is updated based on the innovation covariance matrix (ICM), which is estimated using the error innovation sequence (EIS). However, the distribution of EIS changes due to the time-varying noise, load current dynamics and modelling error, which will lead to inaccurate ICM estimation. Therefore, an intelligent adaptive unscented Kalman filter (IAUKF) method is proposed to detect the distribution change of EIS. Then, the ICM is estimated based on the EIS after the distribution change. Results show that the IAUKF method can improve SOC estimation accuracy significantly. Compared with that of the AUKF method, the root mean squared error and the mean absolute error of SOC based on the IAUKF method decrease by 43.70% and 72.37% under random walk discharge condition, respectively. In addition, the computation time of the IAUKF method slightly increases by 6.27% compared with that of AUKF method. Finally, the effect of initial parameters on the SOC estimation accuracy was analysed. The results indicate that proper algorithm tuning, such as initial window length of EIS for ICM update and the threshold value, can further improve the SOC accuracy based on the proposed IAUKF method. The proposed IAUKF method also shows high robustness against initial measurement noise covariance.     

利用“列表法”分析金属与盐溶液反应后的滤液滤渣

云南省初中学业水平考试中,有关金属与盐溶液反应后的滤液滤渣问题一直是学生的难点。结合金属活动性顺序,利用"列表法"分析,可将复杂问题简单化,将反应后的滤液滤渣成分直观展示出来,有效提高学生做题的准确性,特别对理解能力较弱的同学帮助很大。     

基于EKF和UKF算法非均匀介质热物性参数重建

将无迹卡尔曼滤波技术(unscented Kalman filter, UKF)用于求解一维介质热物性参数反演问题；也对利用扩展卡尔曼滤波技术(extended Kalman filter, EKF)反演一维介质中热导率问题进行了研究。首先给出了正问题模型，然后详细介绍了EKF算法和UKF算法的基本原理。最后为了验证当前算法的可行性，采用UKF算法重建了介质内部随位置变化的热导率，并采用EKF算法重建了介质内部随时间变化的热导率。计算结果表明，UKF算法和EKF算法均能较为准确地反演介质的热导率。为了减小重建结果的时间滞后，建议使用较小的测量误差协方差R。     

隔膜滤板膜片用改性聚丙烯的制备

研究了聚丙烯品种、弹性体和生产工艺对改性聚丙烯微观结构、力学性能的影响,开发了3种具有不同性能特点的隔膜滤板膜片用改性聚丙烯。结果表明:产品具有优异的拉伸强度、断裂拉伸应变和耐温性能;成型的膜片经过高压充水多次开合不发生破裂,满足隔膜式压滤机的使用要求。     

并联有源滤波器的改进重复控制策略研究

针对三相整流负载产生的6k±1次谐波,提出静止坐标系下的改进型6k±1重复控制策略。同时将比例控制与改进型重复控制相结合,设计改进重复控制并联比例的复合控制结构。为减小改进重复控制中延时环节不为整数的影响,采用基于Lagrange插值近似的FIR滤波器逼近分数延时特性。最后对系统进行稳定性分析和详细设计方法进行推导。通过Matlab仿真验证改进重复控制策略能有效跟踪6k±1次谐波且具有良好的补偿效果,动态响应较快。     

一种射频抗电磁干扰的矿用红外温度传感器

设计了一种适用于复杂条件下实施井下温度探测的射频式红外温度传感器。借助于光学系统、光电探测器实时感应井下温度并提取温度信号,同时在DC-DC电源隔离模块中实施EMI滤波以抗电磁干扰,处理后的信号经过A/D转换、运算器放大后显示在LCD上,实施读取数据并记录在传感器的存储片上,实现了矿井复合灾害条件下的温度测试,测试精度控制在±2%。     

非织造过滤介质孔径及截留性能的研究

对应用于液固分离和气固分离的非织造过滤介质的孔径和截留性能测试方法做了研究,指出采用气体流量法进行孔径性能测试,可同时得到非织造过滤介质的最大孔径、平均孔径及孔径分布,全面表征了其孔径性能;并对用于液固和气固分离2个不同领域的非织造过滤介质采用不同的方法做了截留性能测试。同时,对比非织造过滤介质的孔径和截留性能,对二者之间的关联做了探索,为实际工业过程中非织造过滤介质的选用和评价提供了指导。     

基于修正 RSSI 值的四边形加权质心定位算法

在利用接收信号强度指示(RSSI)对无线传感器网络中的未知节点进行定位时,RSSI 值易受环境的影响导致定位误差, 为此提出基于 RSSI 测距修正的四边形加权质心定位算法(QWCRC)。 先对来自同一锚节点的多个 RSSI 值进行卡尔曼滤波,得 到修正的 RSSI 值,致使测距尽可能的接近真实距离;再采用四边形加权定位对未知节点进行定位,同时利用最小二乘法进行辅 助定位,此算法对于相邻锚节点圆不相交的情况给出新的解决方案。 实验结果对比表明,改进的算法相比较于四边形加权质心 算法(QWC)和 RSSI 测距修正的三角形加权算法(TWCRC),在锚节点数目 5×5 和噪声强度为 0 dbm 时,定位精度可分别提升 87. 14%和 35. 51%。     

Observer‐based fuzzy adaptive quantized control for uncertain nonlinear multiagent systems

This paper focuses on consensus quantized control design problem for uncertain nonlinear multiagent systems with unmeasured states. Every follower can be denoted through a system with unmeasurable states, hysteretic quantized input, and unknown nonlinearities. Fuzzy state observer and Fuzzy logic systems are employed to estimate unmeasured states and approximate unknown nonlinear functions, respectively. The hysteretic quantized input can be split into two bounded nonlinear functions to avoid chattering problem. By combining adaptive backstepping and first‐order filter signals, an observer‐based fuzzy adaptive quantized control scheme is designed for each follower. All signals exist in closed‐loop systems are semiglobally uniformly ultimately bounded, and all followers can accomplish a desired consensus results. Finally, a numerical example is employed to elaborate the effectiveness of proposed control strategy.     

基于时空的弱点状运动目标检测技术

如何在复杂背景下持续有效地检测目标位置,一直是研究者们需要面对的主要挑战。本文在研究红外点状移动目标特征的基础上,根据目标无纹理,无形状的特性,提出一种改进的形态学目标增强算法,并利用目标连续时空不变性检测目标。首先,建立多尺度的图像金字塔,在每层上采用改进的形态学算法快速、粗糙定位小目标。然后进一步的根据目标在时空上的位置相关性,提出基于目标运动特征分析的精确检测方法。得到精确稳定的检测结果。最后实验结果表明与经典的形态学检测算法及其他算法相比,该技术能更有效地检测弱小目标,具有更高的鲁棒性。